Jiaxing Zhengye New Material Co., Ltd. Product specification
Item-No: T-1018A
Product type: Moisture reactive polyurethane hot melt adhesive
Physical properties: Appearance: Transparent little yellow
Solid content: 100%
Viscosity: about 3500 mPa.s @140ºC
about 4800 mPa.s @130ºC
about 7000 mPa.s @120ºC
about 10000 mPa.s @110ºC
about 14000 mPa.s @100ºC
Recommendations: The universal moisture-reactive hot melt adhesive has good
adhesion to various materials including metal, plastic and
glass. The type and surface treatment of each material is
highly variable. It is recommended that appropriate and
reasonable adhesion tests be performed before the test
can be used in batches.
Recommended operating conditions:Glue and fit with PUR special equipment.
Recommended size: 110 - 130 ºC
T-1018A contains traces of organic isocyanate before it is
reacted. If long-term excessive contact or inhalation of this
chemical is likely to cause allergies to human body, it is not
recommended to work in confined spaces. It should be
handled and installed in a well-ventilated place.
Appropriate pumping equipment. However, this safety
concern does not exist after it is fully cured.
In the bonding industry, if the relative humidity of the
environment is less than 30%, the reaction curing time will
be prolonged. At this time, it is considered to humidify the
ambient humidity to improve the curing conditions.
Clean Suggestions: The equipment can be cleaned with a PUR-specific cleaning agent.
Operating Temperature:100-120ºC
Storage: This product is easy to cure with any moisture present, so it
should be stored indoors and away from moisture. If any moisture contacts the product, it will
cause the product to increase in viscosity and surface crust.Jiaxing Zhengye New Material Co., Ltd. Product specification
Attentions: Since hot melt adhesives are required to be used at high
temperatures, be sure to wear personal protective equipment. Use appropriate ventilation to
remove fumes from heating the hot melt.Keep materials on a first-in, first-out basis.
The product should be stored in a cool dry place to avoid
exposure to the sun, rain, and fire.
Temperature-viscosity curve:
Temperature
(ºC)
100 110 120 130 140
viscosity
(mPa.s)
14000 10000 7000 4800 3500
The shelf life of this fully packaged product is 6months from the date of manufacture in a dry, cool 5 - 35 ° C storage environment.
When storing, avoid direct sunlight, high humidity and high heat.
Attentions;
Do not mix with other hot melt adhesives to prevent handling and quality problems caused by the blend.
Wear personal protective equipment and equipment to prevent burns caused by use under high
temperatures. Please install air exhaust equipment to remove smoke and steam generated by high heat.
Please grasp the"advanced first use"principle to avoid product expiration.
Audited Supplier 
){kind=link}