Pur Hot Melt Glue For Wood Veneer Profile Wrapping Machine
Wood Working Pur Hot Melt Glue For Wrapping Machine
Item No: T-1120A
Product type: Moisture reactive polyurethane hot melt adhesive
Physical properties: Appearance: Milky white solid
Solid content: 100%
Viscosity: about 12000 mPa.s @160ºC
about 17000 mPa.s @150ºC
about 25000 mPa.s @140ºC
about 34000 mPa.s @130ºC
about 45000 mPa.s @120ºC
Suggested Applications: Mainly used for the coating of building materials and
furniture profiled profiles. Such as: solid wood profiles,
wood plastic, plastic steel, MDF and so on. Covered with
PVC, CPL, veneer, paper, leather and so on. There are many
variations in the types of materials and surface treatments.
It is recommended that appropriate and reasonable
adhesion tests be performed before they can be used in
batches.
Recommended operating conditions:
Glue and fit with special equipment.
Recommended operating temperature:120 - 140ºC
T-1120A contains trace amounts of organic isocyanate before it is reacted. If long-term
excessive contact or inhalation of this chemical is likely to cause allergies to human body, it is
not recommended to work in confined spaces. It should be handled and installed in a
well-ventilated place. Appropriate pumping equipment. However, this safety concern does not
exist after it is fully cured.
In the bonding industry, if the relative humidity of the environment is less than 30%, the
reaction curing time will be prolonged. At this time, it is considered to humidify the ambient
humidity to improve the curing conditions.
Cleaning advice:
The rubber roller can be cleaned with a PUR-specific cleaning agent.
Recommended operating temperature: 100-120ºC
Storage advice:
This product is easy to cure with any moisture present, so it should be stored indoors and
away from moisture. If any moisture contacts the product, it will cause the product to
increase in viscosity and surface crust.Jiaxing Zhengye New Material Co.,Ltd
Product Technical Instructions
Precautions:
1.Since hot melt adhesives are required to be used at high temperatures, be sure to wear
personal protective equipment.
2.Use appropriate ventilation to remove fumes from heating the hot melt.
3.Keep materials on a first-in, first-out basis.
4.The product should be stored in a cool dry place to avoid exposure to the sun, rain, and fire.
Temperature-Viscosity Curing lines:
Temperature
(ºC)
120 130 140 150 160
Viscosity
(mPa.s)
45000 34000 25000 17000 12000
The shelf life of this fully packaged product is 6months from the date of manufacture in a dry, cool 5 - 35 ° C storage environment.
When storing, avoid direct sunlight, high humidity and high heat.
Attentions;
Do not mix with other hot melt adhesives to prevent handling and quality problems caused by the blend.
Wear personal protective equipment and equipment to prevent burns caused by use under high
temperatures. Please install air exhaust equipment to remove smoke and steam generated by high heat.
Please grasp the"advanced first use"principle to avoid product expiration.
Audited Supplier 
){kind=link}